RD-BM-508S Automatic Servo Box-Motion Flow Wrappe | RFQ Sourcing Details

The RD-BM-508S is an automatic servo packaging machine designed to form, fill, and seal film bags around solid products. Its stated applications include bakery products, frozen food, bread, cakes, snacks, and boxed goods.

The machine uses a box-motion arrangement with a reciprocating transverse sealing tool seat and a full-belt conveyor. Supported configuration The listed RD-BM-508S operating range is 60–120 bags per minute.

Its parameter table specifies bag widths of 50–200 mm, bag heights up to 100 mm, bag lengths of 100–400 mm, and film widths up to 500 mm. Listed compatible packing-material structures include OPP or CPP, OPP+CPP, PET+CPP, PET+LLDPE, and PET+VMCPP.

Actual film selection should be matched to the product and sealing requirements. The machine is electrically driven and has a stated total power of 3.5 kW. The listed connection information is 308 V, three-phase, 50/60 Hz, with 0.6 MPa air pressure.

Because the source separa nal footprint should be confirmed for the ordered build. The stated RD-BM-508S weight is 1,000 kg. Operation and changeover A 10.4-inch touch panel provides the operator interface. The memory menu is described as storing 100 product-setting sets to support product changeovers.

A patented quick-disassembly belt design is stated to allow belt removal and replacement without tools. The conveyor is also described as easy to clean and maintain. The control features include mis-cut protection, automatic standby when no product is detected, and automatic troubleshooting.

The machine is offered in forward and reverse configurations. A full-cover safety enclosure with a protection switch is stated to trigger a warning shutdown.

Available options listed for this machine include an adjustable bagger, folding device, automatic film connection, adjustable conveyor belt, feeding and discharge belts, feeding device, ink-wheel printer, heat-transfer printer, labeling machine, and punching device.

These are optional rather than part of the confirmed standard configuration. Procurement questions to confirm Before ordering, provide the actual product dimensions, bag dimensions, film structure and thickness, desired pack presentation, and required output rate.

Ask the supplier to confirm which published dimensional specification applies to the final RD-BM-508S build. The stated 308 V electrical requirement should also be verified against the factory supply at the installation site.

Confirm the included conveyor arrangement, product-detection method, sealing setup, guarding, spare parts, documentation, commissioning scope, and any required optional devices.

Buyers should also request a sample-bag trial using the intended product and film, followed by documented acceptance criteria for seal quality, cut position, package appearance, and sustained operating speed.

Customization, a one-year warranty, training material, technical support, and overseas service are stated as available, but their exact scope, response conditions, exclusions, and any associated charges should be agreed in the purchase contract.